home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Amiga Format CD 38
/
Amiga Format CD38 (1999-03-15)(Future Publishing)(GB)(Track 1 of 3)[!][issue 1999-04].iso
/
-in_the_mag-
/
reader_requests
/
dice_v3.15
/
doc
/
tstat.doc
< prev
next >
Wrap
Text File
|
1999-01-26
|
6KB
|
143 lines
Tstat v37.10 (C) Copyright 1990-1993 Commodore-Amiga, Inc. All Rights Reserved
Usage: tstat [CliNum1-n|ExecTaskName|CliCommandName] [NOCTRL] [-tickdelay]
More options: [SHOWSTACK] [SHOWPC] [SHOWHUNK] [SHOWHUNKCODE] [SERIAL|REMOTE]
Use NOCTRL option when redirecting output to a file
Example: tstat Workbench -10
Changes:
37.9 - SERIAL (aka REMOTE) and Segtracker support
37.10 - Fix to display PC/regs properly for 68EC020
TSTAT
=====
TSTAT is a tool that allows you to snoop on the activity of other tasks.
Tstat prints out information from the specified named task or CLI number's
Task control block, including processor stack frame information containing
the PC and registers the task had when it was last switched out.
Optionally, TSTAT can show the contents of the top of the stack (SHOWSTACK),
the instructions (in hex) at the PC (SHOWPC), and if SegTracker is
running, the seglist/hunk/offset of the PC or an address on the stack
found in a seglist (SHOWHUNK), and a hex dump of 16 longwords starting
with the longword prior to that hunk and offset.
Who to Watch
============
The first command arg to TSTAT tells TSTAT who to watch.
This can be specified in one of the following ways:
- CLI number Example: TSTAT 4
TSTAT will watch CLI 4 and all commands that run as part of CLI 4
- Exec task name or CLI command name Example: TSTAT myprogram
TSTAT will watch any exec task or CLI command named "myprogram",
waiting for it to appear when no task/command is present with that name.
-tickdelay
==========
TSTAT can be told to loop via the -tickdelay option (Example -10).
When looping, by default, TSTAT will use console escape sequences to
present a non-scrolling updating-in-place display (as long as the CON
window it's in is big enough for ithe TSTAT display).
Example: TSTAT myprogram -10
REMOTE/SERIAL option
====================
The new REMOTE option (aka SERIAL) sends the TSTAT output out via kprintf
so the updating display can be watched in a VT100-compatible terminal
package on a remote machine connected via a null modem cable.
Example: TSTAT myprogram -10 SERIAL
or TSTAT myprogram -10 REMOTE
NOCTRL
======
If you would prefer TSTAT's output to have no escape sequences,
use the NOCTRL option. This is useful when capturing or
redirecting TSTAT's output.
Example: TSTAT >ram:capture myprogram -50 NOCTRL
SHOWSTACK
=========
Show the top 16 longwords on the stack. These longwords are displayed
on the @SP lines.
SHOWPC
======
Show the 16 longwords at the PC (usually within exec.library Wait()
unless task was swapped out while READY). These longwords are
displayed on the @PC lines.
SHOWHUNK
========
Requires SegTracker (distributed with latest Enforcer).
Show the seglist name, hunk, and offset for the first of the
following which is also in a seglist: PC, OR an address on stack
whose memory location follows a processor JMP or JSR instruction,
OR any address on stack. Note - TSTAT only serahces back through
72 longwords on the stack. If nothing in a seglist is found within
those 72 longwords, TSTAT will report no seglist found.
SHOWHUNKCODE
============
Requires SegTracker (distributed with latest Enforcer).
Does SHOWHUNK (above) plus shows a hex dump of 16 longwords
at the reported seglist/hunk/offset, starting with the longword
before the offset This may allow you to see the JMP or JSR that
took the task to a Wait(). These longwords are displayed on the
"@HC" lines.
Example: TSTAT more -10 SHOWSTCK SHOWPC SHOWHUNKCODE
Sample Output
=============
CLI=13 Taskname=Shell Process @$5eb470 Type=PROCESS State=WAIT
Sig: Alloc=$0000ffff Wait=$00000100 Recvd=$80000004 Except=$00000000
Priority= 0 TDNest= 0 IDNest=-1 TCode=$002b63b8 ECode=$00202ee0
SP=$004a29a4 tc_SPLower=$004a03c8 tc_SPUpper=$004a2ad8
PC=$002009f0 StkSize=10000 StkUse=308 HiUse=308 LastHi=0
Chip:910136 Fast:342632 Command: more
d0-7:002809ac 000000ff 00000014 00030d40 00000002 0000000c 0017b4c7 005eb4cc
a0-6:004a2a00 005eb470 005eb4cc 00000000 005eb470 002807ce 00280804
@SP: 00216856 00000002 0028099a 005eb4cc 00280804 00215ef0 005ed72c 005ed728
@SP: 056d004a 29d00202 02020202 004a29bc 005eb4cc 00000014 00000000 00000000
@PC: 4e75007c 07002f3c 00000008 6000ff2c 48e70030 20780010 2478002c 43fa0096
@PC: 21c90010 21c9002c 224f7000 4e7b0801 08c00000 223c0000 0a094e7b 10024e7a
On stack $49eae0: seglist "more" Hunk $0001 Offset $00000d80
@HC: 4eaeff34 4a80663c 7000223c 00001000 2c780004 4eaefece 0800000c 67d270ff
@HC: 27400044 222b0014 2c79002e be344eae ff344a80 67082f0b 610010b6 584f7000
Explanation of output
=====================
CLI number (if any) Exec Taskname Process Address, Type, and State
Signals: allocated, waiting for, received, exception
Task Priority, Forbid count (TDNest), Disable count (IDNest) \
task trapcode pointer, task exception code pointer
Stack pointer (SP) adjusted for procesor stack frame; task tc_Upper/Lower
Program counter (PC), Stack size and amount used
Available memory, CLI command name (if any)
Data registers d0-d7
Address registers a0-a6
Optional SHOWSTACK @SP longwords
Optional SHOWPC @PC longwords
Optional SHOWHUNK seglist/hunk/offset, if any
Optional SHOWHUNKCODE @HC longwords
Notes
=====
TDNest and IDNest - generally, for both of these, -1 means none in
effect (i.e. no forbids, no disables). However, currently, when
a Task is on the WAIT list it also has the appearance of having one
Forbid in effect (i.e. TDNest=0). SO, when you re watching a task
whose State=WAIT, TDNest=0 IDNest=-1 should be correct for a task
that has no Forbids or Disables in effect. When a task State=READY,
the TDNest and IDnest should both show as -1 if teh task has no
Forbids or Disables in effect.